![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhtBu3Fr1r3u9hhfudt7LujCne-jDVP8p0krVzBi41idJtA6W_hbMNIDkell40QF5zk3rqCfFTg4jNa2svZttm6DcE_o8jCHWmaIbJEzlQMlyWiyJxhvyo5zWA8HZfQzBEL9OHz0fzFVBAa/s200/2012-10-08+12.52.31.jpg)
I started by taking apart the top and bottom. Then tackled the skirt which was the easy part! There were a couple holes in the side seam, as you can see in the photo on the left, so I took in the skirt on that side only. Since the skirt was two squares of fabric sewed together and gathered with elastic at the waist, it didn't matter how I took it in. In the end, I took it in about 4 inches because I wanted the skirt to be loose.
Next I tackled the top. Which proved to be more difficult than I anticipated since I wanted to remake the neckline from boatneck to v-neck and majorly take in the bodice. If your eyes are good, you can see how large the top is by looking at the pink measuring tape in the photo below to get an idea (measurement is inches).
I cut the top down the front middle and got to work with my new neckline. I made two folds on one side of the bodice and three folds on the other to play with assymetry. I also took in the sides to give it a better fit for my figure. Finally, I sewed the two pieces back together. Here is the finished product, with a close up on the bodice. The dress is navy and emerald, so this black belt won't do, but I just put it on to get an idea of what a belt would look like.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhBj1u9-PpsaRPzDZ0HYf-4AtRebQdbVqjNqOA9zZczTjVcmDcqNcb9piBo7Amr9thRrVlfROirdB8wTJiEVRotljTMpkrvVTKKW8xz0iIVSqwlFO00O1A_DGxy2hGYRPHr72jjfjAT_5Tm/s320/2012-10-20+15.29.22.jpg)
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjb6mV76ndNXfM6lxR7R3VXvOOD6K00YzQcmagkNGNeGenmlA71TtgoX2UCh0Ae_6RRwisFn9AigyCoBboedRUvqgJ_XnFan5kKRPAEeml0I6KsFS6swdRYpoW1BCLByqHfoDazIl0IUuZB/s200/2012-10-20+15.29.13.jpg)